30m Pigeon Post and Wire Pigeon Proofing Kit For Masonry
£129.99
This Post and Wire pigeon proofing kit is intended for use on masonry substrates only. If you require post & wire to be used on other substrates then you should consider using our surface mount kit or our range of specialist brackets for gutters, steel beams and pipes or rails
Our Customer Promise...
- As chosen by Pest Professionals
- Advice from qualified pest controllers if needed
- Competitive online prices
- Free Delivery on orders over £150
- No hassle refunds
Description
This Post and Wire pigeon proofing kit is intended for use on masonry substrates only. If you require post & wire to be used on other substrates then you should consider using our surface mount kit or our range of specialist brackets for gutters, steel beams and pipes or rails.
This kit provides sufficient materials for a run of front 130mm double-head posts followed by a parallel second row (max 65mm behind first row) of single-head 150mm posts.
Once the posts are seated in their 25mm nylon masonry anchor rivets the heads of the posts will be at 105mm and 125mm.
Maximum linear distance between pigeon wire posts = 1500mm (1.5m)
Pigeon wire should be spring tensioned every 1500mm (1.5m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.
In doing so you are spreading the load evenly across the post system and thus avoiding spring overload
Advice on Installing
Do not thread the pigeon wire through the eyelets of the post and onwards to the next post, as this will cause the system to sag and go out of shape.
The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid the system from sagging do not use springs in the counter-tension wires.
Applications
Ideal for proofing masonry cornices, ledges, parapets, sills, balustrades and buttresses
All metal components made in stainless steel
Everything you need to complete the job in one handy kit
Available in 15m, 30m, 60m & 90m kit variants
Enough components for a double run of wire and posts set up to 65mm apart
For kit component list see “more information”
Can be used on brick, natural stone, concrete, render and reconstituted stone
Kit contains the following:
Pigeon Wire 0.45mm 1 X 7 304 Stainless Nylon Coated 100m
Pigeon Post 130mm Double Headed Front Row For Masonry x21
Pigeon Post 150mm Single Headed Second Row For Masonry x21
Bird Wire Grey Masonry Rivet x42
Pigeon Wire Standard Spring x60
Bird Wire Nickel Crimp x200
Screw Pin and Wall Plug x10
6.5mm Masonry Drill Bit – Straight Shank x1
Bird Wire Crimp Tool x1
